Alberta OilNEWS · MARKETS · INDUSTRY
Explore
← All equipment

VALVES & PIPING / INTERACTIVE 3D

Pipeline pigging vessel concept

Explore an enlarged hollow barrel, bolted end plate, reducer, independent connections and four separate cup groups on a static illustrative pig.

Static preview of the pipeline pigging vessel concept schematic
Loading the 3D model…

Drag to orbit · Scroll or pinch to zoom · Select a visible part or use the parts list. Keyboard: focus the view and use arrow keys to orbit.

HOW TO READ THIS MODEL

The system, explained.

A pigging vessel is equipment for handling a tool at a pipeline boundary. Launcher and receiver describe insertion and retrieval roles; a cleaning pig is different from an instrumented in-line inspection tool. This independently invented concept places a static four-cup pig within an enlarged barrel, beside a concentric reducer and a smaller hollow spool. A bolted end plate, separate seal marker, kicker/vent/drain/tap locations and closed signaler envelope identify different component regions. The gold cup shapes have deliberate radial clearance from the invented smaller bore; they do not deform, seal or demonstrate cleaning. This model supplies no detector, inspection data, moving tool or complete pigging station. Compare the vessel, the separate tool and the omitted external installation without reading the cutaway as an opening or operating sequence.

Model scope and limits

Original invented geometry with enlarged hollow barrel, a separate hollow concentric reducer/nominal spool, closed bolted plate, annular gasket marker, four independent open connection necks/flanges, a hollow closed-cap signaler location, four flared solid cup envelopes, eight clamp rings, mandrel/spacers/end markers, individually selectable joint hardware and drilled saddle feet. No OEM CAD, source artwork, patented closure mechanism, product dimensions or surveyed Alberta site imported. Static pig is deliberately undersize relative to this invented smaller bore; vertex-envelope checks are not dynamic passage, bend/valve/tool compatibility, elastomer deformation/contact, propulsion, cleaning, defect detection or inspection-data validation. No qualified pressure boundary, closure interlock/relief system, isolation valves, equalization/bypass routing, vent/disposal handling, protective controls or complete station. No pressure/material/thread/preload/facing/sealing/weld/structural/manufacturing qualification or full collision analysis. No sizing, service selection, loading, opening, launching, retrieving, operating or maintenance procedure.

Further reading: PHMSA: launcher, receiver, trap and cleaning-pig vocabulary; no drawings imported ↗

Source links support further study; no affiliation or endorsement is implied.

CHECK YOUR UNDERSTANDING

What does the separate four-cup pig establish in this model?

Choose an answer

GUIDED COMPONENT STUDY

Trace the system.

Read each explanation, then focus its component in the explorer. This is a learning route through the model, with no operating or maintenance sequence.

  1. Distinguish enlarged barrel from the smaller bore

    The barrel encloses a wider geometric chamber than the smaller axial spool. The static pig is a separate assembly inside it. Reveal internals removes shell-layer pieces; the poster cuts presentation halves only.

  2. Follow the separate taper

    A hollow taper connects two invented bore sizes. The inner and outer surfaces remain separate. A centreline check identifies an open geometric region, without establishing tool passage, duty or a surveyed launcher design.

  3. Identify the static end closure

    The plate centre remains closed while twelve actual fastener locations cross the joint. This is an invented bolted cover, without a quick-opening lock, hinge, pressure-warning device, relief interlock or opening sequence.

  4. Separate seal location from sealing proof

    The thin annular marker sits between the cover and flange region. It locates a seal concept but supplies no material, contact compression, leakage or qualified joint result.

  5. Read the cup shape as an undeformed envelope

    Four separately selectable flared annular shapes sit along the pig. Each has a real central opening and six clamp bores. The solid envelopes are deliberately undersize relative to this invented smaller bore, without wall contact, deformation or cleaning performance.

  6. Find the tool spine

    A separate axial mandrel locates the four cup groups. This solid member contains no magnets, ultrasonic elements, geometry calipers, data package or inspection result. The object illustrates a cup-pig structure rather than a smart inspection tool.

  7. Distinguish cup clamp hardware

    Two annular rings and six stud/washer/nut markers belong to each cup group. Their openings are actual geometry. Threads, clamping compression, elastomer retention and service fit remain unqualified.

  8. Inspect a separate spacer

    Hollow sleeves occupy axial intervals between the separate cup groups. Their bore surrounds the mandrel. They do not specify machining tolerances, contact loads, assembly order or a product bill of materials.

  9. Locate an independent side connection

    This hollow side boundary is separate from the axial pipeline opening. Its label identifies a region in the concept; no connected supply line, valve, equalization arrangement or propulsion calculation is supplied.

  10. Keep the lower connection boundary distinct

    The lower neck has an actual opening through the barrel wall. It ends at an independent flange. No drain valve, collection system, disposal permission, depressurization sequence or safe-state indication is represented.

  11. Separate a detector location from a detection result

    A closed marker above the smaller spool locates an omitted instrument. A hollow neck lies below it, but no sensing trigger, electronics or reading is present. Its presence does not prove a pig has passed.

  12. Inspect support locations

    Two original curved saddles sit above separate drilled feet. Each foot has four actual anchor locations. Anchors, foundations, thermal movement, loads, welds and structural qualification are outside this model.

Additional primary references: PHMSA: launcher, receiver, trap and cleaning-pig roles ↗ · CER: in-line inspection concepts; no source tool image imported ↗

ACCESSIBLE COMPONENT REFERENCE

Every part, in plain language.

Search all components ↗Model provenance ↗
Enlarged barrel wall

Hollow enlarged chamber around a separate static illustrative pig. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Hollow concentric reducer

Separate taper between enlarged and nominal-bore regions; invented concentric choice is not a surveyed trap design. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Nominal-bore spool

Hollow downstream geometric region; no isolation valve or complete pipeline supplied. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Barrel closure flange

Separate drilled annular member around the enlarged chamber. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Closed bolted end plate

Closed bolted cover, deliberately static. No quick-opening mechanism, hinge, interlock or opening sequence is depicted. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Closure gasket location

Thin annular seal-location marker; contact, squeeze and leakage are unverified. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Closure joint 1 stud

Separate smooth fastener marker; no thread, tightening order or preload. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Closure joint 1 washer

Separate annular washer with actual centre opening. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Closure joint 1 nut

Separate bored hexagonal nut; no qualified thread engagement. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Closure joint 2 stud

Separate smooth fastener marker; no thread, tightening order or preload. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Closure joint 2 washer

Separate annular washer with actual centre opening. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Closure joint 2 nut

Separate bored hexagonal nut; no qualified thread engagement. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Closure joint 3 stud

Separate smooth fastener marker; no thread, tightening order or preload. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Closure joint 3 washer

Separate annular washer with actual centre opening. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Closure joint 3 nut

Separate bored hexagonal nut; no qualified thread engagement. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Closure joint 4 stud

Separate smooth fastener marker; no thread, tightening order or preload. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Closure joint 4 washer

Separate annular washer with actual centre opening. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Closure joint 4 nut

Separate bored hexagonal nut; no qualified thread engagement. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Closure joint 5 stud

Separate smooth fastener marker; no thread, tightening order or preload. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Closure joint 5 washer

Separate annular washer with actual centre opening. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Closure joint 5 nut

Separate bored hexagonal nut; no qualified thread engagement. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Closure joint 6 stud

Separate smooth fastener marker; no thread, tightening order or preload. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Closure joint 6 washer

Separate annular washer with actual centre opening. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Closure joint 6 nut

Separate bored hexagonal nut; no qualified thread engagement. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Closure joint 7 stud

Separate smooth fastener marker; no thread, tightening order or preload. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Closure joint 7 washer

Separate annular washer with actual centre opening. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Closure joint 7 nut

Separate bored hexagonal nut; no qualified thread engagement. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Closure joint 8 stud

Separate smooth fastener marker; no thread, tightening order or preload. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Closure joint 8 washer

Separate annular washer with actual centre opening. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Closure joint 8 nut

Separate bored hexagonal nut; no qualified thread engagement. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Closure joint 9 stud

Separate smooth fastener marker; no thread, tightening order or preload. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Closure joint 9 washer

Separate annular washer with actual centre opening. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Closure joint 9 nut

Separate bored hexagonal nut; no qualified thread engagement. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Closure joint 10 stud

Separate smooth fastener marker; no thread, tightening order or preload. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Closure joint 10 washer

Separate annular washer with actual centre opening. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Closure joint 10 nut

Separate bored hexagonal nut; no qualified thread engagement. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Closure joint 11 stud

Separate smooth fastener marker; no thread, tightening order or preload. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Closure joint 11 washer

Separate annular washer with actual centre opening. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Closure joint 11 nut

Separate bored hexagonal nut; no qualified thread engagement. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Closure joint 12 stud

Separate smooth fastener marker; no thread, tightening order or preload. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Closure joint 12 washer

Separate annular washer with actual centre opening. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Closure joint 12 nut

Separate bored hexagonal nut; no qualified thread engagement. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Pipeline boundary flange

Open axial boundary with eight actual fastener bores. It does not establish rated facing or a connected operating pipeline. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Pipeline joint 1 stud

Separate smooth fastener marker; no thread, tightening order or preload. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Pipeline joint 1 washer

Separate annular washer with actual centre opening. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Pipeline joint 1 nut

Separate bored hexagonal nut; no qualified thread engagement. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Pipeline joint 2 stud

Separate smooth fastener marker; no thread, tightening order or preload. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Pipeline joint 2 washer

Separate annular washer with actual centre opening. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Pipeline joint 2 nut

Separate bored hexagonal nut; no qualified thread engagement. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Pipeline joint 3 stud

Separate smooth fastener marker; no thread, tightening order or preload. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Pipeline joint 3 washer

Separate annular washer with actual centre opening. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Pipeline joint 3 nut

Separate bored hexagonal nut; no qualified thread engagement. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Pipeline joint 4 stud

Separate smooth fastener marker; no thread, tightening order or preload. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Pipeline joint 4 washer

Separate annular washer with actual centre opening. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Pipeline joint 4 nut

Separate bored hexagonal nut; no qualified thread engagement. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Pipeline joint 5 stud

Separate smooth fastener marker; no thread, tightening order or preload. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Pipeline joint 5 washer

Separate annular washer with actual centre opening. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Pipeline joint 5 nut

Separate bored hexagonal nut; no qualified thread engagement. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Pipeline joint 6 stud

Separate smooth fastener marker; no thread, tightening order or preload. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Pipeline joint 6 washer

Separate annular washer with actual centre opening. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Pipeline joint 6 nut

Separate bored hexagonal nut; no qualified thread engagement. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Pipeline joint 7 stud

Separate smooth fastener marker; no thread, tightening order or preload. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Pipeline joint 7 washer

Separate annular washer with actual centre opening. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Pipeline joint 7 nut

Separate bored hexagonal nut; no qualified thread engagement. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Pipeline joint 8 stud

Separate smooth fastener marker; no thread, tightening order or preload. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Pipeline joint 8 washer

Separate annular washer with actual centre opening. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Pipeline joint 8 nut

Separate bored hexagonal nut; no qualified thread engagement. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Kicker connection neck

Independent hollow connection location; external routing and valves are absent. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Kicker connection flange

Separate annular boundary flange with drilled hardware locations. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Kicker connection joint 1 stud

Separate smooth fastener marker; no thread, tightening order or preload. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Kicker connection joint 1 washer

Separate annular washer with actual centre opening. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Kicker connection joint 1 nut

Separate bored hexagonal nut; no qualified thread engagement. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Kicker connection joint 2 stud

Separate smooth fastener marker; no thread, tightening order or preload. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Kicker connection joint 2 washer

Separate annular washer with actual centre opening. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Kicker connection joint 2 nut

Separate bored hexagonal nut; no qualified thread engagement. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Kicker connection joint 3 stud

Separate smooth fastener marker; no thread, tightening order or preload. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Kicker connection joint 3 washer

Separate annular washer with actual centre opening. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Kicker connection joint 3 nut

Separate bored hexagonal nut; no qualified thread engagement. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Kicker connection joint 4 stud

Separate smooth fastener marker; no thread, tightening order or preload. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Kicker connection joint 4 washer

Separate annular washer with actual centre opening. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Kicker connection joint 4 nut

Separate bored hexagonal nut; no qualified thread engagement. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Kicker connection joint 5 stud

Separate smooth fastener marker; no thread, tightening order or preload. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Kicker connection joint 5 washer

Separate annular washer with actual centre opening. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Kicker connection joint 5 nut

Separate bored hexagonal nut; no qualified thread engagement. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Kicker connection joint 6 stud

Separate smooth fastener marker; no thread, tightening order or preload. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Kicker connection joint 6 washer

Separate annular washer with actual centre opening. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Kicker connection joint 6 nut

Separate bored hexagonal nut; no qualified thread engagement. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Upper vent connection neck

Independent hollow connection location; external routing and valves are absent. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Upper vent connection flange

Separate annular boundary flange with drilled hardware locations. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Upper vent connection joint 1 stud

Separate smooth fastener marker; no thread, tightening order or preload. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Upper vent connection joint 1 washer

Separate annular washer with actual centre opening. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Upper vent connection joint 1 nut

Separate bored hexagonal nut; no qualified thread engagement. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Upper vent connection joint 2 stud

Separate smooth fastener marker; no thread, tightening order or preload. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Upper vent connection joint 2 washer

Separate annular washer with actual centre opening. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Upper vent connection joint 2 nut

Separate bored hexagonal nut; no qualified thread engagement. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Upper vent connection joint 3 stud

Separate smooth fastener marker; no thread, tightening order or preload. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Upper vent connection joint 3 washer

Separate annular washer with actual centre opening. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Upper vent connection joint 3 nut

Separate bored hexagonal nut; no qualified thread engagement. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Upper vent connection joint 4 stud

Separate smooth fastener marker; no thread, tightening order or preload. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Upper vent connection joint 4 washer

Separate annular washer with actual centre opening. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Upper vent connection joint 4 nut

Separate bored hexagonal nut; no qualified thread engagement. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Pressure-tap connection neck

Independent hollow connection location; external routing and valves are absent. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Pressure-tap connection flange

Separate annular boundary flange with drilled hardware locations. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Pressure-tap connection joint 1 stud

Separate smooth fastener marker; no thread, tightening order or preload. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Pressure-tap connection joint 1 washer

Separate annular washer with actual centre opening. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Pressure-tap connection joint 1 nut

Separate bored hexagonal nut; no qualified thread engagement. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Pressure-tap connection joint 2 stud

Separate smooth fastener marker; no thread, tightening order or preload. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Pressure-tap connection joint 2 washer

Separate annular washer with actual centre opening. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Pressure-tap connection joint 2 nut

Separate bored hexagonal nut; no qualified thread engagement. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Pressure-tap connection joint 3 stud

Separate smooth fastener marker; no thread, tightening order or preload. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Pressure-tap connection joint 3 washer

Separate annular washer with actual centre opening. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Pressure-tap connection joint 3 nut

Separate bored hexagonal nut; no qualified thread engagement. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Pressure-tap connection joint 4 stud

Separate smooth fastener marker; no thread, tightening order or preload. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Pressure-tap connection joint 4 washer

Separate annular washer with actual centre opening. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Pressure-tap connection joint 4 nut

Separate bored hexagonal nut; no qualified thread engagement. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Lower drain connection neck

Independent hollow connection location; external routing and valves are absent. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Lower drain connection flange

Separate annular boundary flange with drilled hardware locations. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Lower drain connection joint 1 stud

Separate smooth fastener marker; no thread, tightening order or preload. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Lower drain connection joint 1 washer

Separate annular washer with actual centre opening. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Lower drain connection joint 1 nut

Separate bored hexagonal nut; no qualified thread engagement. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Lower drain connection joint 2 stud

Separate smooth fastener marker; no thread, tightening order or preload. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Lower drain connection joint 2 washer

Separate annular washer with actual centre opening. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Lower drain connection joint 2 nut

Separate bored hexagonal nut; no qualified thread engagement. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Lower drain connection joint 3 stud

Separate smooth fastener marker; no thread, tightening order or preload. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Lower drain connection joint 3 washer

Separate annular washer with actual centre opening. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Lower drain connection joint 3 nut

Separate bored hexagonal nut; no qualified thread engagement. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Lower drain connection joint 4 stud

Separate smooth fastener marker; no thread, tightening order or preload. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Lower drain connection joint 4 washer

Separate annular washer with actual centre opening. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Lower drain connection joint 4 nut

Separate bored hexagonal nut; no qualified thread engagement. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Signaler mounting neck

Hollow mounting-location neck. The static cap is not a passage detector, instrument or signal. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Closed signaler envelope

Closed external instrument-location envelope only; no sensor, triggering element, electronics, reading or actual pig detection. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Pig / central mandrel

Solid axial spine of the illustrative cup-pig. No internal sensors, data package or inspection capability. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Pig cup 1 / flared cup

Independently invented flared annular cup envelope. Undeformed solid visual geometry, without elastomer formulation, pipe contact, cleaning efficiency or sealing result. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Pig cup 1 / rear clamp ring

Separate bored clamp ring on the mandrel; clamping contact is not qualified. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Pig cup 1 / front clamp ring

Separate bored clamp ring on the mandrel; no compression result. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Pig cup 1 / clamp 1 stud

Separate smooth fastener marker; no thread, tightening order or preload. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Pig cup 1 / clamp 1 washer

Separate annular washer with actual centre opening. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Pig cup 1 / clamp 1 nut

Separate bored hexagonal nut; no qualified thread engagement. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Pig cup 1 / clamp 2 stud

Separate smooth fastener marker; no thread, tightening order or preload. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Pig cup 1 / clamp 2 washer

Separate annular washer with actual centre opening. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Pig cup 1 / clamp 2 nut

Separate bored hexagonal nut; no qualified thread engagement. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Pig cup 1 / clamp 3 stud

Separate smooth fastener marker; no thread, tightening order or preload. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Pig cup 1 / clamp 3 washer

Separate annular washer with actual centre opening. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Pig cup 1 / clamp 3 nut

Separate bored hexagonal nut; no qualified thread engagement. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Pig cup 1 / clamp 4 stud

Separate smooth fastener marker; no thread, tightening order or preload. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Pig cup 1 / clamp 4 washer

Separate annular washer with actual centre opening. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Pig cup 1 / clamp 4 nut

Separate bored hexagonal nut; no qualified thread engagement. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Pig cup 1 / clamp 5 stud

Separate smooth fastener marker; no thread, tightening order or preload. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Pig cup 1 / clamp 5 washer

Separate annular washer with actual centre opening. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Pig cup 1 / clamp 5 nut

Separate bored hexagonal nut; no qualified thread engagement. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Pig cup 1 / clamp 6 stud

Separate smooth fastener marker; no thread, tightening order or preload. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Pig cup 1 / clamp 6 washer

Separate annular washer with actual centre opening. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Pig cup 1 / clamp 6 nut

Separate bored hexagonal nut; no qualified thread engagement. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Pig cup 2 / flared cup

Independently invented flared annular cup envelope. Undeformed solid visual geometry, without elastomer formulation, pipe contact, cleaning efficiency or sealing result. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Pig cup 2 / rear clamp ring

Separate bored clamp ring on the mandrel; clamping contact is not qualified. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Pig cup 2 / front clamp ring

Separate bored clamp ring on the mandrel; no compression result. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Pig cup 2 / clamp 1 stud

Separate smooth fastener marker; no thread, tightening order or preload. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Pig cup 2 / clamp 1 washer

Separate annular washer with actual centre opening. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Pig cup 2 / clamp 1 nut

Separate bored hexagonal nut; no qualified thread engagement. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Pig cup 2 / clamp 2 stud

Separate smooth fastener marker; no thread, tightening order or preload. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Pig cup 2 / clamp 2 washer

Separate annular washer with actual centre opening. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Pig cup 2 / clamp 2 nut

Separate bored hexagonal nut; no qualified thread engagement. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Pig cup 2 / clamp 3 stud

Separate smooth fastener marker; no thread, tightening order or preload. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Pig cup 2 / clamp 3 washer

Separate annular washer with actual centre opening. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Pig cup 2 / clamp 3 nut

Separate bored hexagonal nut; no qualified thread engagement. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Pig cup 2 / clamp 4 stud

Separate smooth fastener marker; no thread, tightening order or preload. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Pig cup 2 / clamp 4 washer

Separate annular washer with actual centre opening. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Pig cup 2 / clamp 4 nut

Separate bored hexagonal nut; no qualified thread engagement. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Pig cup 2 / clamp 5 stud

Separate smooth fastener marker; no thread, tightening order or preload. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Pig cup 2 / clamp 5 washer

Separate annular washer with actual centre opening. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Pig cup 2 / clamp 5 nut

Separate bored hexagonal nut; no qualified thread engagement. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Pig cup 2 / clamp 6 stud

Separate smooth fastener marker; no thread, tightening order or preload. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Pig cup 2 / clamp 6 washer

Separate annular washer with actual centre opening. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Pig cup 2 / clamp 6 nut

Separate bored hexagonal nut; no qualified thread engagement. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Pig cup 3 / flared cup

Independently invented flared annular cup envelope. Undeformed solid visual geometry, without elastomer formulation, pipe contact, cleaning efficiency or sealing result. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Pig cup 3 / rear clamp ring

Separate bored clamp ring on the mandrel; clamping contact is not qualified. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Pig cup 3 / front clamp ring

Separate bored clamp ring on the mandrel; no compression result. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Pig cup 3 / clamp 1 stud

Separate smooth fastener marker; no thread, tightening order or preload. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Pig cup 3 / clamp 1 washer

Separate annular washer with actual centre opening. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Pig cup 3 / clamp 1 nut

Separate bored hexagonal nut; no qualified thread engagement. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Pig cup 3 / clamp 2 stud

Separate smooth fastener marker; no thread, tightening order or preload. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Pig cup 3 / clamp 2 washer

Separate annular washer with actual centre opening. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Pig cup 3 / clamp 2 nut

Separate bored hexagonal nut; no qualified thread engagement. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Pig cup 3 / clamp 3 stud

Separate smooth fastener marker; no thread, tightening order or preload. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Pig cup 3 / clamp 3 washer

Separate annular washer with actual centre opening. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Pig cup 3 / clamp 3 nut

Separate bored hexagonal nut; no qualified thread engagement. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Pig cup 3 / clamp 4 stud

Separate smooth fastener marker; no thread, tightening order or preload. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Pig cup 3 / clamp 4 washer

Separate annular washer with actual centre opening. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Pig cup 3 / clamp 4 nut

Separate bored hexagonal nut; no qualified thread engagement. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Pig cup 3 / clamp 5 stud

Separate smooth fastener marker; no thread, tightening order or preload. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Pig cup 3 / clamp 5 washer

Separate annular washer with actual centre opening. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Pig cup 3 / clamp 5 nut

Separate bored hexagonal nut; no qualified thread engagement. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Pig cup 3 / clamp 6 stud

Separate smooth fastener marker; no thread, tightening order or preload. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Pig cup 3 / clamp 6 washer

Separate annular washer with actual centre opening. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Pig cup 3 / clamp 6 nut

Separate bored hexagonal nut; no qualified thread engagement. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Pig cup 4 / flared cup

Independently invented flared annular cup envelope. Undeformed solid visual geometry, without elastomer formulation, pipe contact, cleaning efficiency or sealing result. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Pig cup 4 / rear clamp ring

Separate bored clamp ring on the mandrel; clamping contact is not qualified. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Pig cup 4 / front clamp ring

Separate bored clamp ring on the mandrel; no compression result. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Pig cup 4 / clamp 1 stud

Separate smooth fastener marker; no thread, tightening order or preload. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Pig cup 4 / clamp 1 washer

Separate annular washer with actual centre opening. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Pig cup 4 / clamp 1 nut

Separate bored hexagonal nut; no qualified thread engagement. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Pig cup 4 / clamp 2 stud

Separate smooth fastener marker; no thread, tightening order or preload. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Pig cup 4 / clamp 2 washer

Separate annular washer with actual centre opening. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Pig cup 4 / clamp 2 nut

Separate bored hexagonal nut; no qualified thread engagement. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Pig cup 4 / clamp 3 stud

Separate smooth fastener marker; no thread, tightening order or preload. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Pig cup 4 / clamp 3 washer

Separate annular washer with actual centre opening. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Pig cup 4 / clamp 3 nut

Separate bored hexagonal nut; no qualified thread engagement. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Pig cup 4 / clamp 4 stud

Separate smooth fastener marker; no thread, tightening order or preload. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Pig cup 4 / clamp 4 washer

Separate annular washer with actual centre opening. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Pig cup 4 / clamp 4 nut

Separate bored hexagonal nut; no qualified thread engagement. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Pig cup 4 / clamp 5 stud

Separate smooth fastener marker; no thread, tightening order or preload. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Pig cup 4 / clamp 5 washer

Separate annular washer with actual centre opening. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Pig cup 4 / clamp 5 nut

Separate bored hexagonal nut; no qualified thread engagement. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Pig cup 4 / clamp 6 stud

Separate smooth fastener marker; no thread, tightening order or preload. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Pig cup 4 / clamp 6 washer

Separate annular washer with actual centre opening. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Pig cup 4 / clamp 6 nut

Separate bored hexagonal nut; no qualified thread engagement. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Pig / spacer sleeve 1

Hollow axial spacer between separate cup groups; axial contact and fit are unverified. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Pig / spacer sleeve 2

Hollow axial spacer between separate cup groups; axial contact and fit are unverified. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Pig / spacer sleeve 3

Hollow axial spacer between separate cup groups; axial contact and fit are unverified. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Pig / spacer sleeve 4

Hollow axial spacer between separate cup groups; axial contact and fit are unverified. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Pig / spacer sleeve 5

Hollow axial spacer between separate cup groups; axial contact and fit are unverified. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Pig / leading end marker

Closed leading-end location marker, without a tool sensor or a rated nose design. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Pig / trailing end marker

Closed trailing-end location marker; no handling attachment or loading instruction. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Saddle support 1

Original curved saddle-location envelope; no load, weld, fatigue or structural result. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Saddle foot 1

Separate support foot with four true anchor locations; anchors and foundations omitted. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Saddle support 2

Original curved saddle-location envelope; no load, weld, fatigue or structural result. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Saddle foot 2

Separate support foot with four true anchor locations; anchors and foundations omitted. Original static teaching geometry; no OEM dimensions, pressure, sealing, material, structural, tool-service or operating qualification.

Compare stationary components and the separate tool.

Bored-ball valve concept ↗Y-strainer concept ↗Gate valve ↗

The pig is a separate illustrative object inside the chamber. The valve and strainer concepts have stationary housings and different internal parts. These independent examples do not form a matched or protected pigging installation.

The pig stays static. Cup shapes have deliberate geometric clearance; no travel, deformation, cleaning, detection or inspection result is calculated.